Highsider Handlebar end mirror Montana-Slim

Handlebar end mirror HIGHSIDER MONTANA-SLIM, short version, satin black finish, incredibly slim, mirror body without ball mount only approx. 5 mm thick, CE-approved.

Handlebar end mirror HIGHSIDER MONTANA-SLIM, court, CE approved

Now take a look at the HIGHSIDER MONTANA-SLIM handlebar end mirror. It's amazing how thin point the mirror body is. Without the ball mount, it's only about 5 mm thick. Mirror body, mirror arm and clamp are made of aluminum. The silk matte surface underlines the precious look. The result is a motorcycle mirror that looks sensational and perfectly finished as usual.

Fits 1" (25.4 mm) and 7/8" (22.2 mm) handlebars. Can be mounted with supplied reduction sockets directly on the head tube or on optional handlebar ends with handlebar-end mirror receptacle. The mirror can be mounted on the right and left, as well as upright or suspended. The precise ball-and-socket joint enables comfortable, highly stable mirror adjustment. A gasket on the clamp gives the short version additional adjustment options for improved visibility. The mirror head can be turned inwards or outwards with an Allen key.

Accessory tip:
HIGHSIDER caps are the perfect complement when handlebar-end mirrors need to be fitted. The mirror holders on the handlebar mounts, which are then no longer needed, can be attractively covered.

Character and overview - whether retro or modern. The HIGHSIDER mirror series is characterized by its distinctive design and aerodynamic function. Caution at its best.

Dimensions:
A/B Head diameter: 100 mm
C Overall width: 90 mm
D Overall height: 145 mm
Rod length: 100 mm
Weight: 153 grams

Scope of delivery: 1 piece
1 X 1" adapter
1 X 7/8" adapter

The most condensed version of a mirror in our CONERO product range captivates with its striking yet timeless design. It beautifully complements the end of your handlebars.

The extremely short CONERO-XS stem, with its dynamic air passage, can be infinitely adjusted to your needs via a joint for optimum visibility.
The mirror head with its small diameter of just 80 mm provides the necessary rear view.
You decide whether you wish to mount the mirror directly onto a 7/8", 1" or 22 mm, 25.4 mm handlebar, or onto a matching HIGHSIDER handlebar end from our range using the reduction sleeves supplied.
The mirror can be used on the left and right.

With its minimalist, timeless design, our CONERO series fits perfectly on many motorcycles. The complementary parts in high-quality machined aluminum give your bike face and character.

NOTE:
The CONERO-XS mirror surface size is not conformal. It is therefore only suitable for non-EU countries or show vehicles.

Dimensions:
A/B Head diameter: 80 mm
C Overall width: 81.5 mm
D Overall height: 125 mm

Dimensions are oriented when the stem is set at a 45° angle to the handlebar tube.

Scope of delivery: 1 piece, incl.
1 x adapter for 7/8 inch (22 mm)
1 x adapter for 1 inch (25.4 mm)

Your bike - your project: Design your bike with our CONERO products at point individual highlight - expressive, rich in contrast and perfect in form!

HIGHSIDER